이 문서는 읽기 전용입니다. 원본을 볼 수는 있지만 바꿀 수는 없습니다. 문제가 있다고 생각하면 관리자에게 문의하세요.
There are usually two types of calcined anthracite coal （abbreviate：CAC ) in China. One of which is gas calcined anthracite widely used in foundry and iron and steel plants as carburizer（carbon additive，Carburant），Another is electrically calcined anthracite which used in carbon electrode paste and cathode carbon blocks. The raw materials for calcined anthracite coke come from the high quality anthracite in Ningxia Province of China. It is the same name as the famous Hon Gai in Vietna Coal in Vietnam -"King of Coal" in the world. Its main characteristics are low phosphorus, low ash and low sulfur. Therefore, [[https://www.jhcarbon.com/product/calcined-anthracite-coal/|casting]] it can be used not only as a carburizing agent in steel smelting and foundry industry, but also in metallurgy industry to produce Carbon block, Cathodic carbon block, carbon brick and carbon paste . Our calcined anthracite is through high temperature treatment and screening, uniform particles, is one of the ideal materials for carburizer and electrode paste. In China, anthracite is usually calcined in electric calciners, rotary kilns and pot furnaces, and the anthracite produced in electric calciners is called as electrically calcined coal (ECA for short) while the anthracite produced in other two calciners is called as gas calcined coal (GCA for short). Electrically calcined anthracite coal, Electrical forging material is made from high-quality anthracite and during calcining, the temperature up to 2000℃ By calining the high-qualityanthracite, the Coal lattice is hanged Then the anthracite becomes half graphitization. Then themateral can meet many demands by changing its physical and chemistry characte Thespecification. Due to it is low in volatile matters, good in thermal and electrical conductivity with the powder resistivity about 600 and mainly used in carbon bricks, electrode pastes and cathode carbon blocks with certain requirements for electrical conductivity. Moreover, the proportion and particle size of ECA in such products vary depending on the situation of different enterprises. The calcination temperature of GCA is about 1200℃ and its electrical conductivity is far inferior to that of ECA, but the sulfur content of anthracite is usually 0.3-0.5%. GCA is widely used in steel and foundry industry as a carburant by virtue of its higher cost performance.